Brick Type 3 Color 2 Set 1

Brick material in 4 variants of bond masonry – stretcher stack header and flemish.
Other variants of bond masonry and formats:
https://3dsky.org/3dmodels/show/kirpich_belyi_3 
https://3dsky.org/3dmodels/show/kirpich_belyi_4 
https://3dsky.org/3dmodels/show/kirpich_rigelnyi_belyi 
https://3dsky.org/3dmodels/show/kirpich_rigelnyi_belyi_1 
https://3dsky.org/3dmodels/show/kirpich_rigelnyi_belyi_2 
https://3dsky.org/3dmodels/show/kirpich_rigelnyi_belyi_3 

In the archive:

Diffuse (Pattern 1 Pattern 2 Pattern 3 Pattern 4)
Gloss (Pattern 1 Pattern 2 Pattern 3 Pattern 4)
Fresnel (Pattern 1 Pattern 2 Pattern 3 Pattern 4)
Normal (Pattern 1 Pattern 2 Pattern 3 Pattern 4)
Bump (Pattern 1 Pattern 2 Pattern 3 Pattern 4)
Displace (Pattern 1 Pattern 2 Pattern 3 Pattern 4)
Mask (Pattern 1 Pattern 2 Pattern 3 Pattern 4)
V-Ray Materials Library
Corona Materials Library
Max V-Ray file
Max Corona file
OBJ file

Texture size: 4420 x 4500 px; 4290 x 4500 px
Real size: 4420 x 4500 mm; 4290 x 4500 mm
Brick size: 250 x 120 x 65 mm

There is a Composite card in the Diffuse slot – in it you can enable or set the desired seam color yourself.
There is a Composite card in the Displace slot – in it you can increase the depth of the seams. A visual instruction is attached to the archive.

The textures are seamless the tiling does not catch the eye even on large areas. All types of masonry perfectly match each other in color and settings. All textures maps and materials have logical names in English. Texture paths have been removed. The Displacement slot is turned off – turn it on if necessary without forgetting to turn off Normal. All my materials (of the same type) are unified with each other – you can replace or supplement one material with another being sure that the color and texture will exactly match. You can find other bricks and materials for the exterior in my profile:
https://3dsky.org/users/maltsev_stepan/models 
If you have any questions or difficulties write in private messages I will be glad to help you!

ATTENTION!

There is no brick geometry in the archive: You purchase a set of textures and customized materials. In the files .max simple Planes with materials superimposed on them.

Who works in a V-Ray version lower than 3.1 be careful there is a Microfaset GTR (GGX) in the materials in the BRDF section if your version is older than 3.1 then the BRDF field will be empty. Choose Blinn Phong or Ward – which is preferable for you. For Corona Render it is recommended to install a version not lower than 1.5 since the Glossiness of materials is configured with PBR in mind.

Creative success!