The archive includes a set of 6 elements of HANSGROHE shower systems here each element is named separately:

1) ShowerSelect Thermostat for concealed installation for 2 functions;
2) Raindance Select E Hand shower 120 3jet;
3) Talis E Single lever basin mixer 240 with pop-up waste set;
4) Raindance E Overhead shower 300 1jet with shower arm;
5) Raindance E Overhead shower 300 1jet with ceiling connection;
6) FixFit Square hose connection with non-return valve;
7) Unica Shower bar S Puro 90 cm with shower hose;
8) Talis E Single lever bath mixer BM;
9) Talis E Single lever basin mixer CM spout 225 mm;
10) Talis E Single lever bidet mixer with pop-up waste set;
11) Talis E Single lever shower mixer BM;
12) Rainfinity Hand shower stick 100 1jet

In this archive you can adjust the position of the watering can with a bar in any direction for models with flexible hoses:

1. Select the model you want to use
2. Copy and place it in your scene;
3. The model must be ungrouped;
4. Click on the watering can or the bar move it to the desired side. In this case the hose will smoothly change its position following the bar with a watering can;
5. If you are satisfied with the height of the watering can go to step number 6. If it is necessary to raise or lower the watering can you must also click on the watering can ungroup it again and then move it up or down;
4. After all the done manipulations you can transfer the model to Editable poly.

Move the watering can within reasonable limits. the mesh is pulled out and the hose loses its shape.

If the hoses don’t match the faucets when you add the model to your scene you need to resave the scene to your version. You can simply disable the reset Xform modifier if you are not going to move the hose.

Vray version 3.20.03
Corona version 1.7

Polys: 142051
Verts: 175695

Stage organization:

– all objects are named in the scene;
– the real size of the world (system blocks – mm);
– all previews are rendered in 3ds max Vray;
– the model is completely ready to use visualization in 3ds max + Vray + Corona.

https://www.hansgrohe.de 

Who works in V-Ray version lower than 3.1 be careful in the materials in the BRDF section there is Microfaset GTR (GGX) if your version is older than 3.1 then the BRDF field will be empty. Choose Blinn Phong or Ward – which is preferable for you

For Corona render it is recommended to install at least version 1.5 as the glossiness of the materials is adjusted with PBR in mind