The archive includes a set of 8 elements of shower systems and faucets Kludi each element is named separately:

1. Overhead shower KLUDI A-QA 6432587-00;
2. Kludi Balance sink faucet 522968775;
3. Faucet on board the tub Kludi Balance 524478775;
4. Kludi Balance sink faucet 522468775;
5. Bath mixer with shower Kludi Balance 525908775;
6. Flush-mounted shower system KLUDI Zenta 3865088011;
7. Shower set KLUDI FIZZ 6774087-00;
8. Shower set KLUDI FIZZ 6764087-00;
9. KLUDI ZENTA 351018638 thermostat for spout bath with hose connection;
10. KLUDI ZENTA 351008638 wall-mounted shower thermostat with hose connection.

For shower sets (rods) you can adjust the position of the watering can in any direction. :

1. Copy and place the shower set in your scene;
2. Copy and place it in your scene;
3. The model needs to be ungrouped;
4. Click on the watering can or bar move it in the desired direction. in this case the hose will smoothly change its position following the rod with the watering can;
5. If you are satisfied with the height of the watering can go to point number 6. If you need to raise or lower the watering can you must also click on the watering can unpack it again and then move it up or down;
6. After all the manipulations done you can translate the model into Editable poly.
7. If the hoses do not match the faucets when adding the model to your scene you need to resave the scene to your version. You can simply disable the reset Xform modifier if you are not going to move the hose.

Move the watering can within reasonable limits because the mesh is stretched and the hose loses its shape.

Vray version 3.20.03
Corona Version 1.7

Polys: 303640
Verts: 361870

Stage organization:

– all objects are assigned names in the scene;
– real world size (system blocks – mm);
– all previews are rendered in 3ds max Vray;
– the model is fully ready to use visualization in 3ds max + Vray+Corona.

https://kludistore.ru 
https://aquanet.ru 
https://www.kludi.com