The archive includes a set of 8 elements of shower systems and faucets Kludi each element is named separately:

1. Bath and shower faucet DN 15 Kludi Bozz;
2. Single lever shower mixer DN 15 Kludi Bozz;
3. Single lever bath and shower mixer DN 15 Kludi Bozz;
4. Kludi Bozz hygienic shower ;
5. Kludi Bozz wall-mounted washbasin mixer;
6. Single lever mixer for washbasin DN 15 Kludi Bozz;
7. Single lever mixer for washbasin 75 DN 15 Kludi Bozz;
8. Single lever bidet mixer DN 15 Kludi Bozz;
9. Shower set KLUDI NOVA FONTE Puristic 2084039-15;
10. Hand shower Kludi Nova Fonte 2085039-15 1.

For shower sets (rods) you can adjust the position of the watering can in any direction. :

1. Copy and place the shower set in your scene;
2. Copy and place it in your scene;
3. The model needs to be ungrouped;
4. Click on the watering can or bar move it in the desired direction. in this case the hose will smoothly change its position following the rod with the watering can;
5. If you are satisfied with the height of the watering can go to point number 6. If you need to raise or lower the watering can you must also click on the watering can unpack it again and then move it up or down;
6. After all the manipulations done you can translate the model into Editable poly.
7. If the hoses do not match the faucets when adding the model to your scene you need to resave the scene to your version. You can simply disable the reset Xform modifier if you are not going to move the hose.

Move the watering can within reasonable limits because the mesh is stretched and the hose loses its shape.

Vray version 3.20.03
Corona Version 1.7

Polys: 294120
Verts: 312884

Stage organization:

– all objects are assigned names in the scene;
– real world size (system blocks – mm);
– all previews are rendered in 3ds max Vray;
– the model is fully ready to use visualization in 3ds max + Vray+Corona.

https://kludistore.ru 
https://aquanet.ru 
https://www.kludi.com